Repairs to uPVC Windows

uPVC is a fantastic choice for modern homes. They are long-lasting, durable and easy to maintain. They are not susceptible to rot or rust like timber and aluminum.

Regularly cleaning and lubricating UPVC windows and doors is essential. This will reduce repair costs and improve energy efficiency.

1. Broken Glass

The damaged glass in your windows could cause severe damage to your home, and could even be fatal. It is important to make sure that your windows are in good shape.

For single pane windows it can be relatively simple to replace them, and the replacement will usually fit inside the frame of the previous one easily. If you have double-paned windows that are joined by internal beading, it will be more difficult to remove and replace the old panes. In this situation, you will need to locate some plastic spacers that aid the new pane in being able to fit properly into the window frame.

Wearing eye protection and thick gloves is a must for anyone who plans to remove the glass yourself. It is also recommended to lay down a dropcloth prior to you begin working on the window panes to ensure that any shards fall onto the fabric and not on the floor which could cause them to be trampled under.

After the glass has been removed from the window, it's best to seal the gap with clear packaging tape or duct tape to block drafts and water from entering the property until a professional can come out and repair the window. This will also act as a barrier that will prevent any intruders from gaining entry to your home. If the gap is large, you may think about a security door that has an integrated window, since this will offer the best of both worlds.

2. Sagging

uPVC is a durable energy-efficient, cost-effective and economical alternative to timber sash window. However, over time they are susceptible to a range of issues, including sagging. A window that is sagging can cause problems with light, draughts and even security. If you find that your uPVC window is beginning to shrink, it is important to act swiftly to prevent the problem from getting worse.

To repair a window that is sagging, you can try repositioning the hinges. First, you'll need to open the windows so you can reach the frame. With a screwdriver, you can take off the hinges on the top and bottom and adjust them by turning them clockwise or anti-clockwise. Close your window to test the fit after having relocated your hinges. If you're satisfied with the size of the window, tighten the screws to keep them in place.

If you are unable to reposition the hinges, you may require replacing the seal. Over time, rubber seals lose their elasticity and become dry which causes them to lose tightness. It is crucial to replace your seal as soon as you can in order to keep your uPVC window watertight and draughtproof.

UPVC handles can also loosen. Often this is due to screws that have become loose over time. However, it could also happen because the handle mechanism has worn out. It's a good thing that it's simple to repair the handle of a window that is loose yourself. First, you'll need to shut the window and then perform an experiment fitting. The joint at the corner of the sash must align with the joint on the casing. If it isn't, you can use a screwdriver to loosen the handle and return the mechanism to its original the position it was in.

3. Water Leaks

It is crucial to take action if you awake each day to find a smoky wall and floors that are wet. The leaks of water from windows do can not only cause degradation of your home's structure but also hinder your efforts to regulate the temperature within your home. Most of the time, uPVC window leaks are caused get more info by a lack or damage to the sealant.

This is a relatively easy fix that can be done by any DIY expert. Depending on how serious the problem is, the old caulking may have read more to be removed. When it is time to uPVC repair, you should be careful not to over-caulk. This can make your window more difficult to clean and decrease its energy efficiency.

Verify that the drainage holes here do not have debris inside them and that the sill pan has been angled correctly to drain away from the window. In more severe situations, you may have to replace the window.

Moldy sills and rotten ones are another sign of water leakage. The fungus thrives in damp conditions and can spread quickly throughout the home.

If the leakage is occurring between the double-glazed glass it is more likely the issue is with the seal rather than the frame. Again this can easily be corrected by an uPVC window expert who can replace the glass seal and regain the full insulation properties of your windows.

4. Faulty Hinges

If your uPVC windows are brittle to open, or are loose and blow open with ease it could be hinges at fault. Anyone with the skills to fix them can replace the hinges in a matter of minutes.

Like all more info mechanical parts hinges are prone to wear out over time. It's easy to replace a hinge on a window but it's much simpler if you have someone to help you to hold the frame.

Verify that the uPVC hinges open and close in the right direction. You can do this by checking for the arrows on each hinge, this indicates which way the window should open.

Faulty window hinges could be caused by improperly opening the window a certain way or by double glazed window repairs poor installation at the factory. This can often be resolved by sending us a photo through our website and we will be more than happy to give you advice.

It is also crucial to grease the hinges regularly. Applying a light engineering lubricant to the hinges is a great method of doing this. We recommend using the lubricant that doesn't contain solvents, like 3-in-1 Multi-Purpose oil. Regular lubrication will make the window easier to open and close. It can also stop corrosion and reduce the possibility of sticking. This must be done at a minimum once a year. WD40 and other solvent based lubricants are not recommended as they could damage parts of your uPVC window.

5. Draughts

Draughts in upvc windows can be caused by a variety of different factors. First, the hinges due to wear and tear may become displaced, which can cause an opening to appear between the sash and the frame. They can be repaired by giving them good cleaning, but when they're beyond repair, it could be necessary to have them re-aligned or replaced. The interlock may also become misaligned. This is located on the hinge side and may need to be cleaned. In certain instances it might be necessary to replace the hinges.

The second most frequent cause of draughts is the window seals, these are prone to wear or damaged over time, and allow air to escape through the gaps. Replacement of these with high-quality weatherstripping can help prevent draughts. Another alternative is to replace the upvc window with low-emissivity glass, this will help to regulate indoor temperatures and again will reduce draughts.

The final method to cut down on drafts effectively is to use a Draught-excluder. These are usually fabric tubes filled with a filler that can be put on top of your window sill. These will help to stop cold air from entering and keep your home warm and cozy!

With a little maintenance and repair your windows made of upvc will continue to provide a great level of security and insulation for your home. It is crucial to keep in mind that all windows eventually wear out and it may be more cost-effective to replace them instead of fixing them. So, if you're having issues with your upvc windows, it is best to seek professional assistance as soon as you can.